Kits Scrapbooking & Model Planes, Cars, Tanks: Airfix Models
Out of Stock
Enjoy the nostalgia with Airfix Vintage Classics. The Churchill was the standard British infantry tank from 1941. It was not fast but had heavy armour, good firepower and good cross-country performance. The Mk.VII used a 75mm gun and had increased frontal armour. It first saw service in Normandy in 1944. 104 pieces. Mould Tools made in 1961, pack Illustration by Ron Jobson, 1975.
TECH SPECSItem Length - without Packaging (cm): 9.4Item Height - without Packaging (cm): 3.28Item Width - without Packaging (cm): 2.8Number of Parts: 104Item Scale: 1/76What's in the Box: Sprues and decalsNumber of Scheme Options: 1Skill Level: 2
Enjoy the nostalgia with Airfix Vintage Classics. The Churchill was the standard British infantry tank from 1941. It was not...
Out of Stock
An aircraft which has often been described as 'Australia's panic fighter', the decision to build the indigenous Commonwealth Aircraft Corporation Boomerang came in the wake of continued Japanese aggression in the Pacific and the need to ensure a continuous future supply of new fighters for the RAAF. By using many sections and components from existing aircraft types under construction in Australia, the first Boomerang was produced just sixteen weeks after the original design decision was made and 250 of these diminutive fighters would eventually be produced. Possessing excellent low altitude performance, the Boomerang would often be used to mark targets for ground attack Corsairs during the latter stages of WWII, a role which earned the distinctive little aircraft the nickname 'Smoky Joe'.
Scale 1:72.
Number of Parts: 31
Dimensions (mm): L107 x W152.
An aircraft which has often been described as 'Australia's panic fighter', the decision to build the indigenous Commonwealth Aircraft Corporation...
Out of Stock
The A27M Cromwell Mk.IV was the most heavily produced version of the new Cruiser Tank Mk.VIII and matched the Centour hull with the highly effective Rolls Royce Meteor engine (A27Meteor), which allowed the tank to travel at impressively high speeds. The tank also featured a quick firing 75mm gun, which was a re-bored version of the British 6 pounder gun and allowed the commandeer to have the option of using American produced armour piercing or high explosive rounds. Although originally introduced in November 1943, persistent problems with the new gun's operation meant that the Mk.IV would not make its combat introduction until the Normandy landings in June 1944, where its speed and mobility would complement the Sherman tanks, which were available in greater numbers. Age: 8 years and up Model No: A67209 Approx package dimensions: 37 x 26 x 6 cms Scale: 1:35 Approx finished model dimensions: 18x7x8 cm Paint...
The A27M Cromwell Mk.IV was the most heavily produced version of the new Cruiser Tank Mk.VIII and matched the Centour...
Out of Stock
Known as the Tomahawk in RAF service, the Curtiss P-40 in all its variants served many of the Allied Air Forces throughout the Second World War, fighting in Europe, across Asia and in the deserts of North Africa. The first model to see active service, the P-408 proved to be an effective and tough low level fighter. Pilots liked the fact it could often get them home after sustaining heavy damage, as well as being able to inflict it with its armament of six machine guns. The P-40B also became synonymous with the shark mouth motif, due to both its use by 112 Squadron RAF in North Africa and the American Volunteer Group in China.
Number of Parts: 106
Dimensions (mm): L202x W237.
Known as the Tomahawk in RAF service, the Curtiss P-40 in all its variants served many of the Allied Air...
$38.50
One of the most rugged aircraft ever built, the DHC Beaver was designed to operate in the vast and often inhospitable expanses of the Canadian north and was able to fly into areas where other aircraft simply could not go. With the ability to operate using wheels, skis or floats, the Beaver possessed outstanding STOL capabilities and was specifically designed around the requirements of bush pilots working in these challenging conditions. Also described in many aviation sources as the safest aircraft ever built, the Beaver was also used by many air arms across the world, including Britain's Army Air Corps, who operated 46 of these magnificent aircraft. They were used to great effect as reconnaissance/intelligence gathering aircraft in Northern Ireland during the 1970s and 80s.
Scale 1:72.
Number of Parts: 91.
Dimensions (mm): L128 x W203.
One of the most rugged aircraft ever built, the DHC Beaver was designed to operate in the vast and often...
Out of Stock
Still a familiar sight at airfields all over the world, the de Havilland Tiger Moth primary trainer made its first flight back in 1931 and went on to provide British and Commonwealth air forces with thousands of trained pilots for their operational squadrons. Performing a similar role to this day, the Tiger Moth allows prospective Warbird pilots to gain valuable experience in flying a tail-dragger aircraft.
Glue Assembly - Paint required (sold separately)
Number of Parts: 42.
Dimensions (mm): L102x W124.
Suitable for ages 8yrs+.
Still a familiar sight at airfields all over the world, the de Havilland Tiger Moth primary trainer made its first...
Out of Stock
Without question, the de Havilland Mosquito qualifies as one of the finist fighting aeroplanes of the Second World War and one which could claim to be the envy of every other air force, particularly the Luftwaffe, who tried, but never quite managed to produce an equivalent aircraft. A true multi-role aircraft, the Mosquito's famous nickname "The Wooden Wonder" referenced the facdt that this hugely successful British aircraft was constructed using "non-strategic" materials and employed a clever system of balsa and hirch plywood lamination, which gave the aircraft great strength.
Glue Assembly - Paint required (sold separately)
Number of Parts: 142.
Dimensions (mm): L174mm x W229mm.
Suitable for ages 8yrs+.
Without question, the de Havilland Mosquito qualifies as one of the finist fighting aeroplanes of the Second World War and...
$29.90
The F-80C Shooting Star relied heavily on early jet technology supplied by the British. The Lockhead Shooting Star was initially developed around the British Halford H.1 engine taken from the de Haviland Vampire prototype. The project advanced under the strictest secrecy, with a team from Lockheed's "Skunk Works" producing an airframe in an impressive 143 days.
Scale 1:72.
Number of Parts: 51
Dimensions (mm): L146 x W164.
The F-80C Shooting Star relied heavily on early jet technology supplied by the British. The Lockhead Shooting Star was initially...
$154.00
An aircraft that must surely be considered one of the most distinctive types to have ever seen Fleet Air Arm service, the Fairey Gannet was as capable as it was unique and was significant as the only post-war military contract to be won by the famous Fairey Aviation Company. Arguably the most unconventional Fairey designed aircraft to enter full production, the Gannet was developed in response to a 1945 Royal Navy requirement for an advanced carrier-based, turboprop-powered anti-submarine hunter-killer, one which was rugged enough to withstand the rigors of operation at sea. Intended to counter the recent expansion of the Soviet submarine fleet at the start of the Cold War era, the Gannet was equipped with all manner of the latest electronic detection equipment and if an enemy submarine was detected, it could be marked, tracked, and if necessary, attacked, using bombs, depth charges, rockets, and air-launched acoustic torpedoes. One...
An aircraft that must surely be considered one of the most distinctive types to have ever seen Fleet Air Arm...
Out of Stock
Undoubtedly one of the most spectacular products of the post-war British aviation industry, the distinctive Fairey Rotodyne was a revolutionary large compound gyroplane which held great promise for both worldwide inter-city medium air transportation, in addition to possessing numerous military applications during the late 1950s.
The impressive looking Rotodyne featured jet powered main rotor tips which operated during vertical take-off and landing, hovering and transitioning to forward flight, before a pair of Napier Eland turboprops were engaged for forward flight.
Despite successfully completing over 350 test flights, just a single prototype aircraft would be built, before the withdrawal of government funding tragically consigned the Fairey Rotodyne to the aviation history books.
Age: 8 years and up
Approx finished model dimentions: 25x9x19 cms
Pieces: 112
Scale: 1:72
Contains: Plastic model kit, instruction sheet, paint layout sheet and decals.
Undoubtedly one of the most spectacular products of the post-war British aviation industry, the distinctive Fairey Rotodyne was a revolutionary...
Out of Stock
After a successful series of light armoured reconnaissance and liaison vehicles, the Ferret Scout Car saw widespread British and Commonwealth military service from the 1950s onwards, with later variants of the Ferret taking part in the Gulf War of 1990. A vehicle type which can trace its lineage back to the successful Daimler Dingo scout car of the Second World War, the Ferret was designed with stealth in mind, a light and fast armoured vehicle which could probe enemy positions, reporting any discovered weak points back to commanders, with their own forces moving to exploit what they found. Weighing in at around 4 tons operational weight, the Ferret was of all welded construction and featured armour protection capable of withstanding most small arms fire, but nothing much heavier, although it was not intended that the vehicle would be operating in direct opposition to heavy enemy armour. If it did find itself...
After a successful series of light armoured reconnaissance and liaison vehicles, the Ferret Scout Car saw widespread British and Commonwealth military...
Out of Stock
The pace of aviation development during the First World War was nothing short of astonishing, with aeroplanes transforming from flimsy, unarmed observation platforms to deadly dominators of the sky in less than a twelve month period of fighting.
The year 1917 would prove to be a significant one for the air war over the trenches of the Western Front, as the British introduced their capable Bristol F.2B Fighter, a true multi-role aircraft and the Germans their Fokker DR.1, an aircraft which would be made famous by the feared Manfred von Richthofen.
The scene was set for a period of unrelenting aerial combat, as both sides struggled for supremacy of the skies.
Scale 1:72.
Number of Parts: 33
Dimensions (mm): Bristol L110mm x W167mm, Fokker L79mm x 110mm.
The pace of aviation development during the First World War was nothing short of astonishing, with aeroplanes transforming from flimsy,...
Out of Stock
Developed as a very small, lightweight, manoeuvable fighter, in an erra where fighter designs seemed to be on an inexoroble rise in size, the Folland Gnat found instead, fame and service with the RAF as a jet trainer. A tiny aircraft in comparison to its contemporaries, the Gnat was used as the mount of a number of aerobatic teams, from the Yellow Jacks to the Red Arrows. Serving until 1979, the Gnat proved to be a capable and much loved trainer.
Glue Assembly - Paint required (sold separately)
Number of Parts: 49.
Dimensions (mm): L155x W102.
Developed as a very small, lightweight, manoeuvable fighter, in an erra where fighter designs seemed to be on an inexoroble...
$33.00
The Gloster Gladiator was developed from the Gloster Gauntlet as a private venture and represented both the peak and the end of the biplane fighter. In many air arms it smoothed the transition to monoplane fighters. And when confronting aircraft of its own era, it performed well.
Age: 8 years and up
Model No: A02052B
Approx package dimensions: 23 x 12 x 4 cms
Scale: 1:72
Approx finished model dimensions: 118x137mm
Pieces: 63
Paint and cement not included (sold separately)
The Gloster Gladiator was developed from the Gloster Gauntlet as a private venture and represented both the peak and the...
$66.00
Historically positioned as Britain's first jet-powered fighter to enter service, the Gloster Meteor played a significant role in the air defence of the nation for well over a decade, with the redesigned F.8 becoming the definitive and most heavily produced variant. It was further developed into the armed reconnaissance FR.9, Meteors which served mainly overseas.
Number of Parts: 154
Dimensions (mm): L188x W157.
Historically positioned as Britain's first jet-powered fighter to enter service, the Gloster Meteor played a significant role in the air...
Out of Stock
Proving the old adage 'If it looks right, then it is right', the Hawker Hunter was a thing of aviation beauty, streamlined and cultured, but a deadly fighting aeroplane at heart.Underlining the Hunter's adaptability, the FGA.9 variant was developed in response to an RAF requirement to replace ground attack Venoms serving with units in the Middle East and was basically an F.6 airframe optimised for close air support operations.Strengthening the Hunter's wing enabled it to carry an impressive array of offensive ordnance, with the FGA.9 presenting the RAF with one of their most capable ground attack fighters. 128 Hunter FGA.9s would see service with home based and overseas squadrons.
Scale 1:48.
Number of Parts: 142.
Dimensions (mm): L291 x W214.
Proving the old adage 'If it looks right, then it is right', the Hawker Hunter was a thing of aviation...
Out of Stock
Considered revolutionary in 1935, by the start of WWII the earliest versions of The Hurricane with fabric covered wings and two bladed propellers had fallen behind the performance of the best German fighters. Nevertheless, once fitted with 3-blade propellers, these early Hurricanes were very successful during the Battle of Britian in 1940.
You can now bring home the legacy of the Hurricane Mk.I today for your Airfix collection! Featuring sprues and decals as well as measuring 133mm in length, this must-have aircraft awaits for you to make a fitting part of your airfix or military range.
Age: 8 years and up
Model No: A01010A
Approx package dimensions: 23 x 12 x 4 cms
Scale: 1:72
Approx finished model dimensions: 133x171mm
Pieces: 63
Paint and cement not included (sold separately)
Considered revolutionary in 1935, by the start of WWII the earliest versions of The Hurricane with fabric covered wings and...
$20.00
The Hawker P.1127 was the first British development aircraft that led to the BAE Harrier, the first vertical and/or short take-off and landing (V/STOL) jet fighter-bomber. Development began in 1957, using the specially developed Bristol Pegasus vectored thrust engine. By the end of 1960, the aircraft had achieved vertical take-off, handing and the transition to horizontal flight.
Pieces: 37
Length: 205mm, Width: 101mm
1:72 scale, Skill Level 1
The Hawker P.1127 was the first British development aircraft that led to the BAE Harrier, the first vertical and/or short...
$66.00
An aircraft that is undoubtedly one of the most significant in the history of aviation, the Hawker Siddeley Harrier GR.1 was developed from the Hawker P.1127 experimental aircraft produced to test the possibilities of V/STOL vectored thrust flight. These aircraft would successfully master the transition from hovering to forward flight and back to the hover, despite several of the development aircraft suffering accidents during testing. The prospect of a viable V/STOL aircraft proved to be of great interest to both the British and US military, who funded further development of the aircraft. The new 'Jump Jet' was an instant hit with the British public, who marvelled at the ingenuity of their aviation industry, which was once again proving to be the envy of the world. As the consummate display performer, the Harrier was always a popular display item with Airshow crowds, with the two forming a bond which would last...
An aircraft that is undoubtedly one of the most significant in the history of aviation, the Hawker Siddeley Harrier GR.1...
Out of Stock
One of the finest aeroplanes of the Second World War, the Hawker Tempest V could trace its design back to the Hurricane fighters. The plane entered Royal Air Force service in early 1944. Although this was still a big aeroplane for a single engined fighter, its airframe was light and it was powered by the massively powerful 24 cylinder Napier Sobre engine, giving the new fighter spectacular performance.
Making its first flight on 2nd September 1942, the Hawker Tempest featured a newly designed laminar flow wing, much thinner than the wing used on its predecessor, allowing the new fighter to slip through the air at incredible speed.
Glue Assembly - Paint required (sold separately)
Number of Parts: 72.
Dimensions (mm): L143x W174.
One of the finest aeroplanes of the Second World War, the Hawker Tempest V could trace its design back to...
$33.90
For most RAF pilots serving between 1960 and 1988, the Hunting Percival Jet Provost will be an extrememly familar aircraft to them. Forming the backbone of RAF pilot training during this period, the Jet Provost was distinctive by its broad fuselage profile, which allowed for a relatively spacious side by side cockit arrangement.
The Hunting Percival Jet Provost T3/T4 is a scale 1:72.
Number of Parts: 45
Dimensions (mm): L137 x W156.
For most RAF pilots serving between 1960 and 1988, the Hunting Percival Jet Provost will be an extrememly familar aircraft...
Out of Stock
The heavy tank named after the infamous Soviet leader, was designed with thick armour to counter the German 88mm guns, the main gun was capable of defeating the German Tiger and Panther tanks. It was mainly a breakthrough tank, firing heavy high-explosive shells against entrenchments and bunkers.
TECH SPECSItem Length - Without Packaging (cm): 13Item Height - Without Packaging (cm): 3.5Item Width - Without Packaging (cm): 4Number of Pieces? 67Item Scale: 1/76Contents (What's in the Box): Sprues and decalsFinish: PlasticNumber of Scheme Options: 1Skill Level: 2
The heavy tank named after the infamous Soviet leader, was designed with thick armour to counter the German 88mm guns,...
$80.00
As the battle hardened, Bf109 fighter pilots of the Luftwaffe began operations against Britain following the Dunkirk evacuation and they were at a disadvantage for the first time.
With only enough fuel for limited time over England, any mechanical issue or damage during combat resulted in their capture at best and certainly helped hasten an end to their war.
Number of Parts: 107
Dimensions (mm): L183 x W205.
As the battle hardened, Bf109 fighter pilots of the Luftwaffe began operations against Britain following the Dunkirk evacuation and they...